-23% sale
Cold Air Intake - 2011-2016 Ford 6.7L
Cold Air Intake - 2011-2016 Ford 6.7L $348.99 $448.99
Vehicle Fitment: 2011, 2012, 2013, 2014, 2015, 2016 Ford F-250, F-350 6.7L MAXIMUM PERFORMANCE Our cold air intake for the 2011-2016 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 36.98% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. NEW SNAP IN LID DESIGN Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy, as the filter can be installed and removed without having to remove the intake tube. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat. (Patent Pending) This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. LESS RESTRICTION. MORE AIRFLOW. The Intake Tube has minimal bends as it connects to the turbo inlet. It is positioned in one clean line with minimum obstructions from the turbo inlet to the intake box and air filter. This results in a decrease in restriction compared to stock. CHOOSE YOUR AIRFLOW. The 75-5104 intake kit has (2) airflow configurations. S&B includes a silicone box plug that can be installed or removed depending on personal preference and airflow requirements.Silicone Box Plug removed: This configuration will provide an extra air inlet that will be pulled from the passenger side fender area.Silicone Box Plug installed: This configuration will seal the secondary air inlet located on the side of the box facing the vehicle fender. The front-facing grill inlet and the front scoop will become the main source of airflow into the Intake Box. NO CHECK ENGINE LIGHTS S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. An injection molded MAF plate in conjunction with a foam MAF sensor gasket ensures a true OE seal to the sensor. make-ford,make-ford-engine-6-7l-powerstroke,make-ford-engine-6-7l-powerstroke-year-2011,make-ford-engine-6-7l-powerstroke-year-2011-year-2011,make-ford-engine-6-7l-powerstroke-year-2012,make-ford-engine-6-7l-powerstroke-year-2012-year-2012,make-ford-engine-6-7l-powerstroke-year-2013,make-ford-engine-6-7l-powerstroke-year-2013-year-2013,make-ford-engine-6-7l-powerstroke-year-2014,make-ford-engine-6-7l-powerstroke-year-2014-year-2014,make-ford-engine-6-7l-powerstroke-year-2015,make-ford-engine-6-7l-powerstroke-year-2015-year-2015,make-ford-engine-6-7l-powerstroke-year-2016,make-ford-engine-6-7l-powerstroke-year-2016-year-2016
-23% sale
Cold Air Intake - 2013-2018 RAM Cummins 6.7L
Cold Air Intake - 2013-2018 RAM Cummins 6.7L $348.99 $448.99
Vehicle Fitment: 2013, 2014, 2015, 2016, 2017, 2018 RAM 2500, 3500. Will not fit Cab & Chassis. MAXIMUM PERFORMANCE Our cold air intake for the 2013-2018 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 54.60% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. BUILT-IN SWING GATE In extreme heat, high loads, or high altitudes S&B's swing gate pivots when your truck accelerates to full throttle, opening the ram-air duct mounted behind the grille which releases cooler and less restrictive air to your engine. Our intake uses the same motor that drives Ram-Air to activate our swing gate, giving you all the benefits of the stock system, plus much more. Draws air from the wheelwell inlet under normal driving conditions or inclement weather conditions (ice, snow, rain) to protect against the elements. SILICONE FILTERS AND COUPLERS Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our silicone filters and couplers won't slide off the tube or require you to wash your hands. WANT MORE AIR?USE BOTH INLETS. Our swing gate functions the same as the stock air box, only better. Unlike stock which uses only one inlet at a time, our kit gives you the option of massive dual inlet airflow. Simply remove the dam from the gate arm and re-attach when desired or to protect against harsh weather. Note: The game arm remains active even with the dam removed. This will prevent you from getting an Active Air Box code when both inlets are open. INNOVATIVE FILTER INLET. The full round inlet radius provides for a smooth transition while allowing for a larger filter with more surface area. The result is better airflow and filtration. make-dodge,make-dodge-engine-6-7l-cummins,make-dodge-engine-6-7l-cummins-year-2013,make-dodge-engine-6-7l-cummins-year-2013-year-2013,make-dodge-engine-6-7l-cummins-year-2014,make-dodge-engine-6-7l-cummins-year-2014-year-2014,make-dodge-engine-6-7l-cummins-year-2015,make-dodge-engine-6-7l-cummins-year-2015-year-2015,make-dodge-engine-6-7l-cummins-year-2016,make-dodge-engine-6-7l-cummins-year-2016-year-2016,make-dodge-engine-6-7l-cummins-year-2017,make-dodge-engine-6-7l-cummins-year-2017-year-2017,make-dodge-engine-6-7l-cummins-year-2018,make-dodge-engine-6-7l-cummins-year-2018-year-2018
-23% sale
Cold Air Intake - 2017-2019 Ford 6.7L
Cold Air Intake - 2017-2019 Ford 6.7L $348.99 $448.99
Vehicle Fitment: 2017, 2018, 2019 Ford F-250, F-350 7L. MAXIMUM PERFORMANCE Our cold air intake for the 2017-2018 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 55.97% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. LESS RESTRICTIVE THAN STOCK We swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a signifcant decrease in restriction compared to stock intake. To learn more airflow and its relation to performance, check out our Air Intake Performance Bulletin. NO MORE CHECK ENGINE LIGHTS S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. LARGE CLEAR LID Our signature large clear lid provides great looks. Featuring a rubber lid seal to keep out power robbing engine heat. make-ford,make-ford-engine-6-7l-powerstroke,make-ford-engine-6-7l-powerstroke-year-2017,make-ford-engine-6-7l-powerstroke-year-2017-year-2017,make-ford-engine-6-7l-powerstroke-year-2018,make-ford-engine-6-7l-powerstroke-year-2018-year-2018,make-ford-engine-6-7l-powerstroke-year-2019,make-ford-engine-6-7l-powerstroke-year-2019-year-2019
-23% sale
Cold Air Intake - 2008-2010 Ford 6.4L
Cold Air Intake - 2008-2010 Ford 6.4L $348.99 $448.99
 Vehicle Fitment: 2008, 2009, 2010 Ford F-250, F-350 MAXIMUM PERFORMANCE Our cold air intake for the 2008-2010 Ford Powerstroke 6.4L was engineered to minimize air restriction and flows 23.10% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. CHOOSE YOUR AIRFLOW. The 75-5105 offers an optional box plug that can be interchanged depending on your airflow requirements. NO MORE CHECK ENGINE LIGHTS. S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. make-ford,make-ford-engine-6-4l-powerstroke,make-ford-engine-6-4l-powerstroke-year-2008,make-ford-engine-6-4l-powerstroke-year-2008-year-2008,make-ford-engine-6-4l-powerstroke-year-2009,make-ford-engine-6-4l-powerstroke-year-2009-year-2009,make-ford-engine-6-4l-powerstroke-year-2010,make-ford-engine-6-4l-powerstroke-year-2010-year-2010
-23% sale
Cold Air Intake - 2010-2012 RAM Cummins 6.7L
Cold Air Intake - 2010-2012 RAM Cummins 6.7L $348.99 $448.99
Vehicle Fitment: 2010, 2011, 2012 RAM 2500, 3500 Will not fit Cab & Chassis. MAXIMUM PERFORMANCE Our cold air intake for the 2010-2012 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 51.68% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. SILICONE FILTERS AND COUPLERS. Silicone is a premium rubber that will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our silicone filters and couplers won't slide off the tube. PULL IN MORE COLD AIR. The secondary inlet lowers the restriction level, resulting in better airflow and performance. COOLER AIR. BETTER PERFORMANCE. Our one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance. AVOID CHECK ENGINE LIGHTS. S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. make-dodge,make-dodge-engine-6-7l-cummins,make-dodge-engine-6-7l-cummins-year-2010,make-dodge-engine-6-7l-cummins-year-2010-year-2010,make-dodge-engine-6-7l-cummins-year-2011,make-dodge-engine-6-7l-cummins-year-2011-year-2011,make-dodge-engine-6-7l-cummins-year-2012,make-dodge-engine-6-7l-cummins-year-2012-year-2012
-23% sale
Cold Air Intake - 2007-2009 RAM Cummins 6.7L
Cold Air Intake - 2007-2009 RAM Cummins 6.7L $348.99 $448.99
Vehicle Fitment: 2007.5, 2008, 2009 RAM 2500, 3500. Will not fit Cab & Chassis. MAXIMUM PERFORMANCE Our cold air intake for the 2007-2009 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 37.06% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. PULL IN MORE COLD AIR. The secondary inlet lowers the restriction level, resulting in better airflow and performance. COOLER AIR. BETTER PERFORMANCE. Our one-piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance. AVOID CHECK ENGINE LIGHTS. S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. CHOOSE YOUR AIRFLOW. Designed with a secondary air inlet that increases airflow. A plug is included for those who prefer to pull in air only from the stock fender inlet. CHOOSE YOUR AIRFLOW. Designed with a secondary air inlet that increases airflow. A plug is included for those who prefer to pull in air only from the stock fender inlet. make-dodge,make-dodge-engine-6-7l-cummins,make-dodge-engine-6-7l-cummins-year-2007,make-dodge-engine-6-7l-cummins-year-2007-year-2007,make-dodge-engine-6-7l-cummins-year-2008,make-dodge-engine-6-7l-cummins-year-2008-year-2008,make-dodge-engine-6-7l-cummins-year-2009,make-dodge-engine-6-7l-cummins-year-2009-year-2009
-23% sale
Cold Air Intake - 2011 - 2016 GMC/Chevrolet 6.6L
Cold Air Intake - 2011 - 2016 GMC/Chevrolet 6.6L $348.99 $448.99
Vehicle Fitment: 2011, 2012, 2013, 2014, 2015, 2016 GMC Sierra and Chevrolet Silverado 2500/3500 6.6L GMC/Chevrolet MAXIMUM PERFORMANCE Our cold air intake for the 2011-2016 Chevy / GMC GMC/Chevrolet 6.6L was engineered to minimize air restriction and flows 29.10% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. STRONGER, BETTER SILICONE PARTS. Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our silicone filters and couplers won't slide off the tube. Available in either 8-layer Cotton Cleanable or Dry Extendable media. CHOOSE YOUR AIRFLOW. Our 2011-2016 GMC/Chevrolet intake was designed with a secondary inlet, resulting in even better airflow. A silicone plug is included for those who prefer to pull in air only from the fender inlet. AVOID CHECK ENGINE LIGHTS. S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. COOLER AIR. BETTER PERFORMANCE. Our one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance. make-gmc-chevrolet,make-gmc-chevrolet-engine-6-6l-duramax,make-gmc-chevrolet-engine-6-6l-duramax-year-2011,make-gmc-chevrolet-engine-6-6l-duramax-year-2011-year-2011,make-gmc-chevrolet-engine-6-6l-duramax-year-2012,make-gmc-chevrolet-engine-6-6l-duramax-year-2012-year-2012,make-gmc-chevrolet-engine-6-6l-duramax-year-2013,make-gmc-chevrolet-engine-6-6l-duramax-year-2013-year-2013,make-gmc-chevrolet-engine-6-6l-duramax-year-2014,make-gmc-chevrolet-engine-6-6l-duramax-year-2014-year-2014,make-gmc-chevrolet-engine-6-6l-duramax-year-2015,make-gmc-chevrolet-engine-6-6l-duramax-year-2015-year-2015,make-gmc-chevrolet-engine-6-6l-duramax-year-2016,make-gmc-chevrolet-engine-6-6l-duramax-year-2016-year-2016
-23% sale
Cold Air Intake - 2007.5-2010 GMC/Chevrolet 6.6L
Cold Air Intake - 2007.5-2010 GMC/Chevrolet 6.6L $348.99 $448.99
Vehicle Fitment: 2007.5, 2008, 2009, 2010 GMC Sierra and Chevrolet Silverado 2500/3500 6.6L GMC/Chevrolet. MAXIMUM PERFORMANCE Our cold air intake for the 2007-2010 Chevy / GMC GMC/Chevrolet 6.6L was engineered to minimize air restriction and flows 53.06% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. NO MORE CHECK ENGINE LIGHTS S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. MULTIPLE AIR INLETS More air equals better performance. The GMC/Chevrolet LMM intake kit features two large air inlet points. If you want to customize the amount of air you take in, we include an optonal box plug that can seal off one inlet point. LARGE DIAMETER INTAKE TUBE The large diameter intake tube was designed to minimize restriction. The tube is positioned in one clean line with minimum obstructions from the throttle body to the air box. This means more cool air and better performance. make-gmc-chevrolet,make-gmc-chevrolet-engine-6-6l-duramax,make-gmc-chevrolet-engine-6-6l-duramax-year-2007-5,make-gmc-chevrolet-engine-6-6l-duramax-year-2007-5-year-2007-5,make-gmc-chevrolet-engine-6-6l-duramax-year-2008,make-gmc-chevrolet-engine-6-6l-duramax-year-2008-year-2008,make-gmc-chevrolet-engine-6-6l-duramax-year-2009,make-gmc-chevrolet-engine-6-6l-duramax-year-2009-year-2009,make-gmc-chevrolet-engine-6-6l-duramax-year-2010,make-gmc-chevrolet-engine-6-6l-duramax-year-2010-year-2010
-23% sale
Cold Air Intake 2017-2019 SILVERADO / SIERRA DURAMAX L5P 6.6L
Cold Air Intake 2017-2019 SILVERADO / SIERRA DURAMAX L5P 6.6L $348.99 $448.99
Vehicle Fitment: 2017, 2018, 2019 GMC Sierra and Chevrolet Silverado 2500/3500 6.6L GMC/Chevrolet. MAXIMUM PERFORMANCE Our cold air intake for the 2017-2019 Silverado / Sierra GMC/Chevrolet 6.6L was engineered to minimize air restriction and flows 43.86% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.   FILTER PROTECT YOUR ENGINE This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media. MAF SENSOR NO MORE CHECK ENGINE LIGHTS S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor. CLEAR LID WITH INTEGRATED SCOOP. On the L5P intake kit, our signature clear lid is integrated right into the silicone air scoop that feeds more air to the filter, and provides great looks. MULTIPLE AIR INLETS More air equals better performance. The L5P intake kit features two large air inlet points. If you want to customize the amount of air you take in, we include an optional box plug that can seal off one inlet point. make-gmc-chevrolet,make-gmc-chevrolet-engine-6-6l-duramax,make-gmc-chevrolet-engine-6-6l-duramax-year-2017,make-gmc-chevrolet-engine-6-6l-duramax-year-2017-year-2017,make-gmc-chevrolet-engine-6-6l-duramax-year-2018,make-gmc-chevrolet-engine-6-6l-duramax-year-2018-year-2018,make-gmc-chevrolet-engine-6-6l-duramax-year-2019,make-gmc-chevrolet-engine-6-6l-duramax-year-2019-year-2019
-23% sale
Cold Air Intake - 2003-2007 Ford 6.0L
Cold Air Intake - 2003-2007 Ford 6.0L $348.99 $448.99
Vehicle Fitment: 2003, 2004, 2005, 2006, 2007 Ford F-250, F-350, Excursion. MAXIMUM PERFORMANCE Our cold air intake for the 2003-2007 Ford Powerstroke 6.0L was engineered to minimize air restriction and flows 36.82% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. EVEN MORE DESIGN IMPROVEMENTS. S&B's one piece box design features an integrated box seal with a relocated filter minder location. COOLER AIR. MORE DENSITY. Our oversized snorkel with lip engulfs more cold air. The cooler the air, the greater the density, resulting in better performance. SILICONE FILTERS AND COUPLERS Silicone is a premium rubber which will seal better and last longer. It handles as much as 400F without cracking or tearing. With a high friction surface and no oily residue, our silicone filters and couplers won't slide off the tube. HUGE SILICONE LID FUNNEL. We added a silicone lid funnel to isolate the engine heat while tunneling more to your engine. The funnel attaches to the top of the air box and is easily interchangeable with our signature clear lid. MAINTENANCE IS A BREEZE. The filter allows for easy removal and maintenance. Now just remove the lid and pop out the filter. There's no need to remove the intake tube or loosen couplers. GOING THE DISTANCE. Our competitors stop short, but S&B's intake tube extends all the way to the turbo for maximum airflow. make-ford,make-ford-engine-6-0l-powerstroke,make-ford-engine-6-0l-powerstroke-year-2003,make-ford-engine-6-0l-powerstroke-year-2003-year-2003,make-ford-engine-6-0l-powerstroke-year-2004,make-ford-engine-6-0l-powerstroke-year-2004-year-2004,make-ford-engine-6-0l-powerstroke-year-2005,make-ford-engine-6-0l-powerstroke-year-2005-year-2005,make-ford-engine-6-0l-powerstroke-year-2006,make-ford-engine-6-0l-powerstroke-year-2006-year-2006,make-ford-engine-6-0l-powerstroke-year-2007,make-ford-engine-6-0l-powerstroke-year-2007-year-2007
Precision II: Cleaning & Oil Kit (Red Oil)
Precision II: Cleaning & Oil Kit (Red Oil) $37.35
The Precision II has double the amount of oil and 63% more cleaner. A more precise, reengineered, oil applicator makes it easier to apply. Works on any S&B filter and 95% of all other high-performance filters. Maximize performance and longevity. Enough oil to service most filters 3 times. Precise oil application. Easy to use trigger applicator.
Precision II: Cleaning & Oil Kit 6 PACK (Red Oil)
Precision II: Cleaning & Oil Kit 6 PACK (Red Oil) $232.20
The Precision II has double the amount of oil and 63% more cleaner. A more precise, reengineered, oil applicator makes it easier to apply. Works on any S&B filter and 95% of all other high-performance filters. Maximize performance and longevity. Enough oil to service most filters 3 times. Precise oil application. Easy to use trigger applicator.
Precision II: Cleaning & Oil Kit 6 PACK (Blue Oil)
Precision II: Cleaning & Oil Kit 6 PACK (Blue Oil) $232.20
The Precision II has double the amount of oil and 63% more cleaner. A more precise, reengineered, oil applicator makes it easier to apply. Works on any S&B filter and 95% of all other high-performance filters. Maximize performance and longevity. Enough oil to service most filters 3 times. Precise oil application. Easy to use trigger applicator.
Precision II: Cleaning & Oil Kit (Blue Oil)
Precision II: Cleaning & Oil Kit (Blue Oil) $37.35
The Precision II has double the amount of oil and 63% more cleaner. A more precise, reengineered, oil applicator makes it easier to apply. Works on any S&B filter and 95% of all other high-performance filters. Maximize performance and longevity. Enough oil to service most filters 3 times. Precise oil application. Easy to use trigger applicator.